Cantenna Project - FINALLY DONE! (With pictures)

The cantenna project is finally completed and had its first test today.  Of all antennas tried in our test, including a commercial dipole antenna, the Cantenna surpassed every other antenna in quality of signal.

When pointed directly at its target, the antenna should get between 5 and 10 miles when attached to a high-quality wireless card.  Even with several trees in the way, the antenna was able to find our test router and hold around 4 bars (although the trees made it difficult to get a clear signal and figure out exactly where to point the dish).

I'll be adding a few more modifications to the antenna in the future, but the prototype design is below.



The completed antenna.  Still a bit shabby with the electrical tape holding it on, but I've recently added an adjustable clamp to it instead to allow for better flexibility.


Closeup of the antenna.

Comments

Post a Comment

Popular posts from this blog

NARCAN: The danger of a "Three Strikes" policy

While speaking with a relative last week, the topic moved to the opiate crisis and the use of Naloxone (NARCAN) to reverse the effects of opiate overdoses.  He said something that I have heard all too often: "I think that once they've been Narcanned three times, we should just let them die."  It's a common sentiment, and one that quite a few people share. I understand where they are coming from.  Opioid abuse and the fallout thereof are a great burden on the EMS system.  Most people who are "brought back" by NARCAN refuse to be transported for further evaluation at the hospital, meaning that the ambulance service generally bears the cost of the medication, equipment, and manpower required to save them. But I hope that those reading will consider something else: rarely ever has anyone woken up and said, "I think I'm going to get addicted to Meth today."  A shocking number of people who abuse drugs of any kind got into it through fairly v
Read more

Arcade Cabinet - PICTURES!

Image
The control panel for the arcade project is nearly finished, and I finally have some pictures of the design.  I still need to add the joysticks (the mounts for these are already installed), and wire the micro switches from the back.  In addition, a nice graphic will be added between the plexiglass and wood, and trim will be added to the sides to give it a smooth, finished look.  Note: Picture taken with substandard camera in substandard lighting, but hopefully should be smooth enough to give a good idea of how it's coming along. The completed board, showing the P1 and P2 buttons as well as the joystick mounts and button configuration for each side. Detail view of the Player 1 side. The most difficult part so far was cutting the fiberglass.  One crack did appear in the fiberglass edge during the drilling of the button holes, but there will be a decal covering that particular part so it may not be necessary to redo the fiberglass entirely.
Read more

Arcade machine - ALMOST DONE! (Painted and Pictures!)

Image
The arcade machine is nearing its completion.  The following things are still on the list: 1: Finish etching the marquee 2: put the speakers, computer, and surge protector in the cabinet 3: Put the keyboard/mouse drawer in. 4: Finish the trim on the control board and add the luan to the front of it. 5: Mount the TV And that's it!  It should be one more full day's work and the project should be finally finished.  I've added a couple pictures of today's progress, one after the first coat of paint and the second after the painting was done and it was moved to our living room. First coat of paint on.  Still haven't added paint to the bottom trim for the door. Final painting is done for the cabinet.  I will be hand painting the controller board before attaching it permanently, but I need to attach the microswitches for the left and right paddle switches (for pinball games) and the coin door switches first.
Read more